The easiest, portable rail spill containment berm™ available.

Introducing the Stinger Rail Berms™, designed to provide portable spill containment and control for bottom loading and unloading rail tank cars!

This lightweight containment pad is designed to provide a temporary bermed containment area around the valves below a rail tank car during loading/unloading operations. At only 80 lb., it can be easily lifted into place by two operators!
Unit of Measure



N/A 4 ft1.83 m


N/A 6 ft1.22 m


N/A 1 ft30 cm


N/A 40 lb18.14 kg

Spill Capacity

N/A 120 gal455 L


N/A Environmental Protection Agency (EPA) 40 CFR 264.175 National Pollutant Discharge Elimination System (NPDES) Spill Prevention, Control, and Countermeasure (SPCC)

Additional Information

Additional Information

N/A The berm™ provides a 4' x 4' x 12" sump area that sits in the void between the tracks directly under the valves. Should a large release occur, captured liquid would begin to fill this berm™. The spilled product would then be directed over the outside rail to an alternate compartment 4' x 18" x 12" H. This outside compartment is fitted with two 2" drains that includes a male CAM-LOC fitting for quick coupling of system to hoses that can transport the spilled materials to a nearby containment area.